Hello everyone! This is ASIAN and I'm going to give you some tips on building the UGRC Lab Predator Chassis using the Redcat Gen 8 drivetrain. First off you will have to take your time and be patient while trimming everything. There's a little trick to everything. (pictures below)
Carefully trim off the stock shock towers so that the front mount is flush.
2. Here is where you really need to take your time. You will have to trim the drivers side transmission mounts to line everything up. Trim a little at a time till it all lines up correctly.
3. After that you can now adjust and drill the passenger side transmission mount.
4. At the end it all should be centered and everything smoothly together.
Like always, PLEASE reach out to any of us if you have ANY questions!
留言